
Set of Feed Wheels and Needles to allow different pile heights and shapes when using the Hofmann Handtufting Gun.
- 16 mm needle and feed wheel
- 18 mm needle and feed wheel
- 20 mm needle and feed wheel
- 25 mm needle and feed wheel
- 30 mm needle and feed wheel
- 35 mm needle and feed wheel
- 40 mm needle and feed wheel
- 45 mm needle and feed wheel
Using the 45 mm feed wheel with the 16 mm needle will create a “J” tuft with a 16 mm short leg and 74 mm long leg.
Using these wheels and needles the carpet or rug pile can be made at different heights for regular even cut pile as well as loop pile which is achieved by removing the blade that cuts the yarn as it is blown through the hollow needle.